We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:

--- Panels will be suitable for 415 ± 6% volt, 3 phase (4 W E) 50 HZ AC supply.
--- They will be installed indoors and will work efficiently up to an ambient temperature of 50°C
--- All doors will be suitably labeled and marked for convenience of operation & maintenance.

We offer a wide range of PCC Panels to our clients These Power Control Centers are ideal for the various operations of pumps, lights, motorized vents and various others. These panels are manufactured as per client's specifications and requirements which very well meet with the industry demands.  We offer these Power Control Centers at most affordable rate. 

Our company is engaged in designing and manufacturing of Motor Control Centers or MCC that have the capacity to fed larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units comprise:

--- Full voltage non-reversing and full voltage reversing starters
--- AC variable frequency drives 
--- PLC I/O chassis
--- Solid-state motor controllers 
--- Lighting panels
--- Transformers 
--- Analog or digital metering 
--- Feeder circuit breakers
--- Feeder fusible disconnects

The MCC Panels offered by us, are made up of superior quality parts.hese Motor Control Panels are fitted with transformer, motor starting, capacitor feeder and multiple power stabs to offer high consistency. We are highly praised for the optimum performance of our MCC Panels.

We are a well known company engaged in designing and manufacturing of AMF (Auto Mains Failure) Panels that are applicable for managing DG sets. Our panels come with in-built safety features for protecting the Engine & Alternator. The range of our AMF panels are manufactured upto 550 KVA and are fabricated from 14 / 16 SWG thickness, high grade CRCA sheet steel. The use of quality material has made our panels dust & vermin proof. Powder coated for longer life and meticulously wired. 

General Features

--- Mains Failure: 3-attempt engine cranking after mains failure otherwise the engine fails to start. Engine starts-up within 10 sec of mains failure otherwise 2 more start pulses after every 10-15 seconds. 
--- Unhealthy Mains: Any of the phase failure or voltage drops below set value.
--- Mains Restoration: Engine keeps running for 30 seconds before stopping, as recommended by the Engine manufacturer.

Metering
--- One Ammeter with CT’s & selector switch, one frequency meter, one voltmeter with selector switch and one hour meter.

 These panels are widely used to automatically change over from mains electricity supply to the genset whenever there is a failure of main supply. This system automatically changes back, thereby stopping the generator when the main supply is restored. We are offering these AMF Panels at most comprehensive rate.

We offer a range of APFC Panel to our valuable clients. Power Factor Corrections are widely used for maintaining the electricity flow in various industries. These panels are used to adjust and improve the power factor of Electrical System of any industry. Our products are very easy to use and maintain and it works with very low consumption of electricity. These can be availed at most comprehensive rate.

FEATURES:

--- World advanced Microcontroller Technology is used

--- Auto/Manual selector is available

--- Kvar by Kvar selectable system

--- Stage on LED indications are available

--- Stage to stage capacitor boosting & reconnection intervals; 20 secs delay

--- Fully enclosed wall / Floor mountable

--- Working temperature up to 55 degree Celsius

--- Cable entry: Bottom (top optional)

--- Incoming control and total protection of panel with 3pole/ MCCB /ACB

--- Soft relay operation of capacitor –boosting help for smooth power factor

--- Management & avoid sound and disturbances

--- Power & control wiring: by copper multi strand ISI wire

--- Capacitor bank rating:440v/according to your load required KVAR

We manufacture an expert range of auto transformer Starter Panels. These auto transformer starter panels are manufactured using the finest quality materials procured from the most reliable sources in the market and are in strict compliance with the prevailing industry standards.

-- Highly Rated Transformers and contactor

-- The entire motor protection/safety device included.

-- Double door /cubical type duly epoxy powder coated.

-- Used for Heavy HP/Rating Motors.

The auto transformers which we provide have the capability to adapt to different voltages which makes them ideal for worldwide applications. These panels are widely used in the process of reconnection of electric power source from a primary source to a standby source. The basic function of these panels has been to transfer power.